| IEEE TRANSACTIONS ON | ||||||
| ULTRASONICS,
FERROELECTRICS, AND FREQUENCY CONTROL |
||||||
|
||||||
| October 2007 | VOLUME 54 | NUMBER 10 | ITUCER | (ISSN 0885-3010) | ||
|
|
||||
| Front
Cover Images Front
Cover Inside Front Cover Inside Back Cover Table of Contents |
||||
|
|
||||
|
Information For Contributors. . .1909 |
||||
|
A Multimedia
Example . . .1914 |
||||
|
Call for Papers: 2008 IEEE International Ultrasonics Symposium . . .1915 |
||||
|
Special Issue on Modeling, Optimization, and Design of Acoustic Devices | ||||
|
|
||||
|
SPECIAL ISSUE PAPERS |
||||
|
Introduction to the Special Issue on Modeling, Optimization, and Design of Acoustic Devices |
||||
|
Mathematical Optimization of Multilayer Piezoelectric Devices with Nonuniform Layers by Simulated Annealing |
||||
|
Iterative WLS Design of SAW Bandpass Filters | ||||
|
One-Port SAW Resonators Using Natural SPUDT Substrates | ||||
|
Suppression of Transverse Mode Responses in Ultra-Wideband SAW Resonators Fabricated on a Cu-Grating/15°YX-LiNbO3 Structure | ||||
|
Optimization Design of a Lamb Wave Device for Density Sensing of Nonviscous Liquid |
||||
|
Optimal Design of an RSPUDT-Based SAW Filter with Constant Group Delay |
||||
|
Design Considerations of Miller Oscillators for High-Sensitivity QCM Sensors in Damping Media |
||||
|
Simulation of Absolute Amplitudes of Ultrasound Signals Using Equivalent Circuits |
||||
|
Vibration Distribution in Output Sections of a Piezoelectric Transformer Operating at Thickness Shear Mode |
||||
|
Miniature Multimode Monolithic Flextensional Transducers |
||||
|
Flexural Vibrations and Resonance of Piezoelectric Cantilevers with a Nonpiezoelectric Extension |
||||
|
Analysis of Frequency Response of IDT/ZnO/Si SAW Filter Using the Coupling of Modes Model |
||||
|
Matrix Algorithms for Modeling Acoustic Waves in Piezoelectric Multilayers |
||||
|
Finite Element Technique for the Assessment of 3-1 and “Super 1-3” Connectivity Piezoelectric Composite Transducers |
||||
|
Finite Element Analysis of Piezoelectric Thin Film Membrane Structures |
||||
|
Analysis of Piezoelectric Ultrasonic Transducers Attached to Waveguides Using Waveguide Finite Elements |
||||
|
FEM/BEM Analysis of a Generalized Periodic Array |
||||
|
FEM/BEM for Simulation of LSAW Devices |
||||
|
|
||||
|
REGULAR ISSUE PAPERS |
||||
|
Medical Ultrasound |
||||
|
Designing Waveforms for Temporal Encoding Using a Frequency Sampling Method |
||||
|
Golay Pulse Encoding for Microbubble Contrast Imaging in Ultrasound |
||||
|
High Speed Imaging of Bubble Clouds Generated in Pulsed Ultrasound Cavitational Therapy—Histotripsy |
||||
|
Physical Acoustics |
||||
|
Ultra Temperature-Stable Bulk-Acoustic-Wave Resonators with SiO2 Compensation Layer |
||||
|
Modeling of a Disk-Type Piezoelectric Transformer |
||||
|
Electroelastic Effect of Thickness Mode Langasite Resonators |
||||
|
Sensors, NDE, and Industrial Applications |
||||
|
Processing of Ultrasonic Array Signals for Characterizing Defects. Part I: Signal Synthesis |
||||
|
Processing of Ultrasonic Array Signals for Characterizing Defects. Part II: Experimental Work |
||||
|
Surface Acoustic Waves |
||||
|
Detection and High-Precision Positioning of Liquid Droplets Using SAW Systems |
||||
|
Operation Mechanism of Double-Mode Surface Acoustic Wave Filters with Pitch-Modulated IDTs and Reflectors |
||||
|
Low-Loss and Wide-Band Double-Mode Surface Acoustic Wave Filters Using Pitch-Modulated Interdigital Transducers
and Reflectors |
||||
|
Transducers and Transducers Materials |
||||
|
Polyurea Thin Film Ultrasonic Transducers for Nondestructive Testing and Medical Imaging |
||||
|
Optimization of Elastic Nonlinear Behavior Measurements of Ceramic Piezoelectric Resonators with Burst Excitation |
||||
|
|
||||
|
CORRESPONDENCE |
||||
|
Statistical Modeling of the Radio-Frequency Signal for Partially- and Fully-Developed Speckle Based on a Generalized
Gaussian Model with Application to Echocardiography |
||||
|
Thickness Vibration of an Electroelastic Plate Under Biasing Fields |
||||
|
One-Dimensional Equations for Planar Piezoelectric Curved Bars |
||||
|
Application of an Alternating Phase-Shifting Mask Design Method to Near-Field Photolithography for Fabricating More Than 2 GHz SAW Devices |
||||