13th Piezoelectric Devices Conference & Exhibition Vol. 1

13th Piezoelectric Devices Conference & Exhibition Vol. 1

Foreword

Awards

Committees, Exhibitors, and Sponsors

Table of Contents

Welcome

State of Art VHF Quartz Blanks Processing
- Lech Morawiec

Vacuum Annealing Improves the Ageing Characteristics of Crystal Unit
- K. K. Chakrabarti

Generating Surface Figure and Finish on Quartz - Part 4 Polishing and Etching
- John H. Sherman, Jr.

Automated Measuring and Sorting System for Round and Rectangular Quartz Blanks Using X-Ray Diffraction
- Hans Bradaczek

Clean Room Design and Operation or Predictable Engineering Vs Your Great Aunts Old Wives Tales
- Stephen L. Gilbert

Design of Experiments for Product and Process Improvement
- Christopher J. Nachtsheim

Statistical Design of Experiments Applied to a Complex Manufacturing Process
- Jonathan W. Fosie and Gary R. Johnson

Environmental Sensitivites of Quartz Crystal Oscillators
- Fred L. Walls

Specification of Crystals and Crystal Oscillators
- Patrick R. Brown

Purchase Strategy Development for Crystals and Crystal Oscillators
- Patrick R. Brown

Supplier Selection Considerations
- Patrick R. Brown

Tuna Boat Vs VCXO or How to Specify a Quartz Crystal
- John B. Fisher, Dale Hartung, and Bruce Wright

ISO 9000 - Quality Pain or Potential Profit
- Ron Given

Frequency Equations for the Plano-Convex AT Cut Quartz Crystal
- Luther C. Barcus

Suppression of Anharmonic Spuriious Modes in Overtone Quartz Resonators by Modified Electrode Design
- Vladimir Brajovic and Ljiljana Spasic

A Process-Capable System for Hermetic Solder Sealing of Tight Tolerance Crystals
- James Socki

At Strip Resonator Applications and Capabilities
- W. T. Woodland and R. S. Witte

Measurement of Quartz Crystal Unit Resonator Parameters with a New Method by Pi-Network
- Akhbaart -Ali

Characterization and Measurement of Filters Using a Vector Network Analyzer
- Warren L. Smith

Review and Fundamentals of Surface Acoustic Wave Technology
- Donald C. Malocha

Time and Frequency Metrology, Phase Noise Measurements and Characierization of Precision Oscillators
- David W. Allan

Trends in the Piezoelectric Devices Market
- Kathryn Walsh

The Piezoelectric Industry: A Perspective on Current and Future Applications
- Gary A. Breed

A Review of Crystal Band Reject Filters
- C. W. (Bill) Pond

A High Frequency Test Fixture for Two Port Passive Devices
- Mark Cavin and Donald C. Malocha

Ultralinear Small-Angle Phase Modulator
- John Lowe and F. L. Walls

Negative and Positive Q in Oscillator Circuits
- Roger L. Clark

CAD Techniques for Crystal Circuits
- Randall W. Rhea

Back Cover

13th Piezoelectric Devices Conference & Exhibition Vol. 2

13th Piezoelectric Devices Conference & Exhibition Vol. 2

Foreword

Awards

Committees, Exhibitors, and Sponsors

Table of Contents

Welcome

Generating Surface Finish and Figure on Quartz - Part 4
- John H. Sherman, Jr.

Clean Room Requirements for Crystal Industry
- Juergen H. Staudte

Statistical Design of Experiments Applied to a Complex Manufacturing Process: An Example
- Jonathan W. Foise and Gary R. Johnson

Environmental Sensitivities of Quartz Crystal Oscillators
- Fred L. Walls

A Crystal Filter Tutorial for the Customer
- C. W. Pond, Daryl Kemper, and David Kemper

Supression of Anharmonic Spurious Modes in Overtone Quartz Resonators by Modified Electrode Design - A Practical Approach
- Vladimir Brajovic and Ljiljana Spasic

Oscillator Analysis Using S-Parameter Techniques
- Warren Smith, D. E. Newell, James Wordelman, and Dave Kenny

Investigation of Idosyncracies Observed in Self-Bias Logic Gates
- Kenneth Hartman

Oscillator Instabilities and Specifications
- John R. Vig

Back Cover