5th Quartz Crystal Conference Proceedings
Welcome
- Jack Ray
Design of Crystal Filters with Transmission Zeros
- Robert G. Kinsman
Designer's Guide to RCL Measurements
- Bob Botos
Introduction to Practical Crystal Oscillator Design
- Benjamin Parzen
Photolithographic Manufacture of Quartz Devices
- Steven C. Moore
Photolithographic Manufacture of Quartz Devices
- Steven C. Moore
Design Routine for Contoured AT-Cut Resonators
- John H. Sherman, Jr.
Measurement Systems for Quartz Crystal Units
- W. H. Horton
Drive Level Effects on Transmission Measurements of "AT" Overtone Resonators
- Jack L. Saunders
Quartz Resonator Mounting And Packaging: Requirements And Techniques
- Roger W. Ward
The Physical Constants of Quartz
- Paul Fenlon, Larry Dworsky, John Lawrence, and Don Ryback
The Effect of Temperature on the Mlotional Parameters and the Piezoelectric Constants in AT-Cut Resonators
- Virgil E. Bottom
The Pierce, Colpitts, Clapp Crystal Oscillator Family
- Benjamin Parzen
Correlation Analysis of X-Rays and Final Test Measurement Error
- Al Kitlica, Jr.
Long Term Crystal Stability Study
- Kenneth E. Grata
MCT Application to Crystal Plating
- Franz Sauerland
The Butler Oscillator Family
- Benjamin Parzen
High Quality Cultured Quartz: Its Growth and Characterization
- Durand R. Kinloch
Quartz Defects Observed in Chemically-Etched Miniature Resonators
- Hal Thicksten
Design Considerations for Etched Quartz Crystal Evaporation Masks
- Howard Friedman
Design Considerations for Etched Quartz Crystal Evaporation Masks
- Howard Friedman
The Behavior of Quartz Resonators at Low Drive Levels
- Virgil E. Bottom
Selection of Crystal Oscillator Circuits, Their Relative Performance, and Their Design Algorithms
- Benjamin Parzen
Basic Theory, Fabrication & Application of Quartz Crystal Units
- John D. Holmbeck